Login Status  Login Status

Not logged in

» Login
Now accepting PayPal

You must be logged in to view prices.

Click Here to Sign In
Home » Manufacturers » Flying Skull Plant Products
 
FEATURED
Product ID: EliteMicro
Manufacturer: Flying Skull Plant Products
Elite Micro

The Flying Skull plant food line includes Elite Micro, Elite Grow, Elite Bloom, Z7, Essential Flora Extract, On Schedule, Elite pH Up and Elite pH Down.

The three basic components are used in combination. Elite Micro, Elite Grow and Elite Bloom are used in the first two weeks of plant growth. Then, Elite Bloom is taken away and only Elite Micro and Elite Grow are used throughout vegetation cycle. When switching to the bloom cycle, all three are used; Elite Micro, Elite Grow and Elite Bloom.

The Flying Skull Elite plant food line is a highly soluble nutrient. It was formulated to deliver high quality soluble nutrients to plants at lower EC/PPM levels. There are three parts that comprise the basic formula, Elite Micro, Elite Grow and Elite Bloom. In most cases the grower will find that by simply following the feeding schedule, plant growth will be excellent. However, the way in which these three formulas were created gives the grower the ability to easily modify the basic formula for his particular plants.

1 pound makes up to 440 gallons of nutrient solution.

The basic three part formula is non organic and particulate free. This is important to growers who use hydroponic systems like Deep Water Culture, since inanimate slime (stemming from organic particulate) is the leading cause of plant death and system failure in these systems.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: EliteBloom
Manufacturer: Flying Skull Plant Products
Elite Bloom

The Flying Skull plant food line includes Elite Micro, Elite Grow, Elite Bloom, Z7, Essential Flora Extract, On Schedule, Elite pH Up and Elite pH Down.

The three basic components are used in combination. Elite Micro, Elite Grow and Elite Bloom are used in the first two weeks of plant growth. Then, Elite Bloom is taken away and only Elite Micro and Elite Grow are used throughout vegetation cycle. When switching to the bloom cycle, all three are used; Elite Micro, Elite Grow and Elite Bloom.

The Flying Skull Elite plant food line is a highly soluble nutrient. It was formulated to deliver high quality soluble nutrients to plants at lower EC/PPM levels. There are three parts that comprise the basic formula, Elite Micro, Elite Grow and Elite Bloom. In most cases the grower will find that by simply following the feeding schedule, plant growth will be excellent. However, the way in which these three formulas were created gives the grower the ability to easily modify the basic formula for his particular plants.

1 pound makes up to 440 gallons of nutrient solution.

The basic three part formula is non organic and particulate free. This is important to growers who use hydroponic systems like Deep Water Culture, since inanimate slime (stemming from organic particulate) is the leading cause of plant death and system failure in these systems.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: EliteGrow
Manufacturer: Flying Skull Plant Products
Elite Grow

The Flying Skull plant food line includes Elite Micro, Elite Grow, Elite Bloom, Z7, Essential Flora Extract, On Schedule, Elite pH Up and Elite pH Down.

The three basic components are used in combination. Elite Micro, Elite Grow and Elite Bloom are used in the first two weeks of plant growth. Then, Elite Bloom is taken away and only Elite Micro and Elite Grow are used throughout vegetation cycle. When switching to the bloom cycle, all three are used; Elite Micro, Elite Grow and Elite Bloom.

The Flying Skull Elite plant food line is a highly soluble nutrient. It was formulated to deliver high quality soluble nutrients to plants at lower EC/PPM levels. There are three parts that comprise the basic formula, Elite Micro, Elite Grow and Elite Bloom. In most cases the grower will find that by simply following the feeding schedule, plant growth will be excellent. However, the way in which these three formulas were created gives the grower the ability to easily modify the basic formula for his particular plants.

1 pound makes up to 440 gallons of nutrient solution.

The basic three part formula is non organic and particulate free. This is important to growers who use hydroponic systems like Deep Water Culture, since inanimate slime (stemming from organic particulate) is the leading cause of plant death and system failure in these systems.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSCloneGuard
Manufacturer: Flying Skull Plant Products
Clone Guard

If pests don't have access to the clone they can't damage it!

Flying Skull’s Clone Guard does two very important things to insure successful cloning. #1: When applied to leaves and stems, it creates a proactive shield to lock out invading pests like Spider Mites, Aphids, White Fly, Powdery Mildew, Mold and Black Spot from access to the clone. If pests don't have access to the clone they can't damage it! #2: Clone Guard’s proactive shield locks in water, preventing the leaves from wilting while the roots are forming. All gardeners requiring a consistent and successful cloning program must have this product!

Not for Resale in Portland Oregon Metro Area.

Clone Guard works in the same way your home window screens separate you from invading insects and pests while allowing air to go in and out. Once applied to the clone’s leaves and stem, Clone Guard dries to form a thin biodegradable proactive film. This high tech film helps to keep clones safe by locking out invading insects, mildew and mold while locking in precious water molecules inside leaf and stem cells. Water retention in the clone’s leaves and stem is critical to the forming of roots.

Directions for Use: Shake bottle well before diluting to preferred strength. Mix with water. Prepare as a spray or dip. Take cuttings, dip cutting in rooting gels or compounds and apply Clone Guard. Store at room temperature. After mixing with water, Clone Guard is good for 5 days. Store concentrate at room temperature. Keep from freezing. May be applied in full Sun.

Clone Guard may used on leaf and stem at any stage of plant growth.

Mixing: Standard strength dilution ratio: 1 part Clone Guard to 7 parts water. Aggressive strength dilution ratio: 1 part Clone Guard to 4 parts water.

Non Plant Food Ingredient

Active Ingredients: Vinyl-Acrylic Polymers

Clone Guard Label

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSZ7EnzymeCleanser
Manufacturer: Flying Skull Plant Products
Z7 Enzyme Cleanser

Update: 1 Gallon Size comes 1 set to a case. Quart size and smaller are shrink wrapped together.

User Tips to Keep Plants Healthy and at First Sign of Unhealthy Plants:

Root zone problems show up as: slow growth, yellow leaf, dry leaf, leaf spot, leaf drop, leaf curl, tip burn, purple or red stem, Interveinal chlorosis, Interveinal necrosis, leaf and fruit deformation, low sugar Brix readings or low oil content in the finished product. These root zone problem need to be solved now! You will never get rid of the deficiency problems listed above unless you deal with your root zone first!

Indoor Growers:

  1. Flush the root zone with Z7 treated water. This includes all growing media for hydroponics, soil less and soil gardening. For every gallon of soil the pot will hold use the same amount of Z7 treated water. Let the flushed water drain to waste. From then on; for soil and soilless growers, when you water or fertilize allow at least 25 percent of the total liquid used to drain from the pot and go to waste.
  2. Do not allow plants to soak up water or nutrients from drip trays.
  3. Hydroponic and cloning machines at first use; flush growing media with Z7 and use Z7 all of the time from cloning to harvest. When hydroponic reservoirs or tanks are low, add water to the plant sites to make up water in the reservoir. Cover growing media to keep water from evaporating form the growing media. Completely rinse all media in ebb and flow tables and other hydroponic systems when introducing Z7.

Z7 replaces many products:

Z7 replaces H2O2 (Hydrogen Peroxide), chlorine, chloramines, colloidal silver and other products designed to clean, sterilize or oxygenate the soil, growing medium or nutrient solution. Using sterilizing or sanitizing products in the water is a lost cause and will only generate a vicious cycle of treating the symptoms over and over again. Enzyme products are not needed when using Z7.

Enzyme users: Do a side by side test with Z7 added to your watering and fertilizer feeding program next to plants growing with enzymes added to your watering and fertilizer feeding program. Z7 will outperform enzyme products. See for yourself! Did you know that Enzyme products cost up to 30 times more money to use than Z7?

Enzyme products are so expensive most growers can't afford to use them. Z7 cost only 2.5 cents to treat a gallon of water. How can you beat that!

What not to do when using Z7:

When using Z7, discontinue the use of H2O2, chlorine, chloramines, colloidal silver and other products designed to clean, sanitize or sterilize the soil, growing medium or nutrient solution. These products disrupt the ability of Z7 to work its magic. Those products are the very worst for growing plants. By pure definition the word sterilize or sanitize means “will not support life”. Now honestly, would you really pour some “will not support life” into your plants soil or hydro system? We think not. Killing pathogens like Pythium with chemicals and Silver doesn’t work! Z7 is not an insecticide, fungicide or sterilizing agent but a tool to protect the roots by forming a barrier to lock pathogens out and allow roots to thrive.

Enzyme products are not needed when using Z7.

You can use Hydrogen Peroxide (H2O2), Chlorine, Chloramines and Colloidal Silver to clean plastic and other materials between grows but never while the plants are growing. Discontinue the use of enzyme products when using Z7.

Side By Side Tests:

Side by side tests when the plants have just been transplanted from seedling or clone is the very best time to test Z7. This is the time when the plant is evaluating how big to make its vascular system. The better the initial osmotic transfer in the young plant the bigger the plants vascular system will be. A few weeks of using Z7 will tell the tale and make believers of the most skeptical grower. Use Z7 with all water usage except for field growers who use Z7 at first planting and whenever possible after that. Z7 will help the plant to repair rot damaged roots within 72 hours.

More Info:

Z7 is super concentrated and extremely economical for indoor-outdoor hobby and commercial growers utilizing Soil or Hydroponic growing systems; Z7 costs only 2.5 cents per gallon of nutrient treated. The one gallon set treats 7,570 gallons of nutrient. Set sizes available: 8 oz, 16 oz, 32 oz, 1 gallon, 2.5 gallon and 5 gallon. Z7 uses no oils, detergents, soaps, surfactants, chlorine, hydrogen peroxide or any harmful chemicals.

Recommended Dosage:

  • 1 teaspoon of each part per 10 gallons of water
  • ½ ml of each part per gallon of water

Z7 is not a plant food; it simply allows plant foods to work better - see the real performance of your plants nutrients and additives by allowing Mother Nature to protect you – unreal root growth and health! Z7 increases the chances that the plant will grow to its genetic potential. Is to be used in every watering or feeding, field growers apply at first planting and whenever possible.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FloraExtract
Manufacturer: Flying Skull Plant Products
Flora Extract

Flying Skull introduces Essential Flora Extract, a highly soluble and concentrated (1/2 mL per gallon) natural additive formulated to deactivate chlorine and chloramines. As with all Flying Skull products, great care has been taken to make sure that the chemistry behind Essential Flora Extract will work without causing any adverse chemical reaction with any other Flying Skull product. Essential Flora Extract has been successfully used in all hydroponic systems including Deep Water Culture without a negative impact to the plants delicate root system. Z7 can easily breakdown the natural Essential Flora Extract formula for protection from inanimate slime. It is added to the nutrient from time of clone to harvest. While Essential Flora Extract will benefit all water supplies it is not sold as a plant food.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSCalMageXtreme
Manufacturer: Flying Skull Plant Products
Cal Mag eXtreme

The need for Calcium and Magnesium in bloom is great. While being classified as micronutrients they are just as important as NPK. We have added Iron to help magnesium’s role play with phosphorous and Vitamin B-1. Flying Skull will always be trying to find better ways for the master gardener to better his crop and continue to manufacture only the finest formulations for plant growth and insect/fungus control.

Not for Resale in Portland Oregon Metro Area.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: OnSchedule
Manufacturer: Flying Skull Plant Products
On Schedule

Flying Skull introduces On Schedule to the market place. Its part in the Flying Skull line is to help the grower master the timing of harvests so they are On Schedule. Just like the baker’s doughnuts; product must come out of the oven on time, tasting, chewing and smelling the same as they did yesterday. An interruption of the timely offering of product could force his patrons to find a consistent source of good tasting doughnuts somewhere else and never come back!

On Schedule is simply sprayed onto the plants during the last 10 day period before turning lighting systems to 12  On 12 OFF. It will be a few days after the lights have gone to 12 ON 12 OFF that you will notice enhanced bud set. It will always be the same length of time, from the time your lighting was turned to 12/12 that you will see the plants setting bud.

It’s good knowing your ON Schedule.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: USB
Manufacturer: Flying Skull Plant Products
USB
:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSNukeEm2017
Manufacturer: Flying Skull Plant Products
Nuke Em - New Formula

For free shipping, order a full case.

Flying Skull Plant Products has introduced NUKE EM to the indoor outdoor gardening community. It is a multi-purpose insecticide and fungicide that kills the eggs, larvae, juvenile and adult insects that feeds on and ultimately kills plants. Its target is all species of Spider Mites, Thrips, Whitefly, Mealy bugs and other plant insect parasites. Its unique formula also allows for outstanding control of the vast varieties of powdery mildew and mold found in the garden.

Not for Sale in Mississippi, New Mexico or Indiana.

Not for Resale in Portland Oregon Metro Area.

Nuke Em:

  • Does kill mites, thrips, aphids, mealy bugs and more
  • Does kill eggs, larvae, juvenile and adult insects
  • Does control mildew and mold
  • Does work on walls, floors, hydro equipment
  • Is concentrated and economical
  • Is approved for use on the day of harvest
  • Is safe around people and pets
  • Is Breakthrough Technology

Nuke Em:

  • Doesn’t alter the taste of produce
  • Doesn’t lower the value of produce
  • Doesn’t smell bad
  • Doesn’t make leaves, stems and flowers sticky
  • Doesn’t slow photosynthesis
  • Doesn’t have oils in it
  • Doesn’t have soap in it
  • Doesn’t have chemical surfactants in it

Insects, mildew and mold can’t become immune to NUKE EM’s effects. Its unique formula is comprised of 100% food grade ingredients that are commonly found in every day food products! Other manufactures of insecticides, fungicides and plant washes use chemical surfactants, soaps or oil in their formulas that leave smelly, bad tasting and sticky residue on produce. Ultimately these ingredients will reduce the desired flavor, smell and sales of the gardener’s produce. NUKE EM’s formula does not include surfactants, soaps or oil for the obvious reasons.

Anyone using Flying Skull’s NUKE EM will immediately see a complete control of plant parasites. At the same time they will notice a product that was easy to use, safe to spray and doesn’t smell bad.

It is important to remember that NUKEM EM is a multi-purpose product so it replaces many expensive single target pesticides and fungicides. This makes it very affordable. It can be used on walls, floors and other gardening surfaces to kill insects and mold where they are hiding.

NUKE EM’s highly concentrated formula must be diluted before spraying onto plants or garden surfaces. Read and follow all label cautions and directions.

1 Gallon Concentrate makes up to 32 gallons of ready to use spray.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSNukeEmWA
Manufacturer: Flying Skull Plant Products
Nuke Em - Washington State Label

Please note: Nuke Em® is no longer OMRI listed.

This product is labeled for use in Washington State.

For free shipping, order a full case.

Nuke Em®:

  • Kills Broad Mites, Russet Mites, Spider mites, Leaf Aphids, Thrips, Whitefly and more
  • Kills eggs, larvae, juvenile and adult insects
  • Controls mildew and mold before and after harvest
  • Leaves zero toxic pesticide residue on plant materials
  • Is concentrated and economical
  • Is approved for use on or after the day of harvest
  • Is safe around people and pets
  • May be sprayed just before harvest to prevent leaf mold while in the drying process
  • Doesn’t alter the taste or smell of growing crops or finished produce
  • Doesn’t lower the value of produce
  • Doesn’t slow photosynthesis by reducing light to photon cells on leaves
  • Doesn’t slow photosynthesis from residue clogging the leaf stomata
  • Doesn’t contain high concentrations of oils
  • Doesn’t contain chemical surfactants
  • Doesn’t contain petroleum or Pyrethrins
  • Doesn’t smell bad
  • Doesn’t make leaves, stems and flowers sticky

Flying Skull Plant Products brings Nuke Em® to the indoor/outdoor gardening community. This multi-purpose insecticide and fungicide kills the eggs, larvae, juvenile and adult insects that feed on and ultimately kill plants. It targets all species of Broad Mites, Russet Mites, Spider Mites, Root Aphids, Leaf Aphids, Thrips, Whitefly and other plant leaf and soil insect parasites. Its unique formula also allows for outstanding control of the vast varieties of powdery mildew and mold found in the garden. Most of the ingredients are food grade ingredients that you would find in a loaf of bread! Brilliant!!

Nuke Em® won’t lower the value of your harvest like other insecticides/fungicides! You’ve worked hard for your customers, don’t lose them because your harvest didn’t taste or smell the same. Think about it; do you have customers that purchased from you but then they stopped? Was it after a crop you treated with insecticides or fungicides? Did those insecticides/fungicides have Pyrethrums, concentrated plant oils, petroleum oils or detergents in them? Don’t feel alone. We have gotten thousands of new customers because they lost profit from crops after they applied supposedly natural pesticides. Don’t worry; Nuke Em® is here to keep your plant value high and your customers loyal!

Nuke Em® is registered in Washington State for I-502? Yes, but they require a little change on the label.

Be wary of insecticides made with concentrated oils and detergents. These ingredients will plug and cover the plant’s leaf stomata and light cells reducing slowing plant growth, reducing water uptake, reducing photosynthesis and make it harder for the plant to recover from insect attack.

Oil and detergent pesticides slow the plant’s growth by restricting water from leaving the leaf. That’s why your plants had slow or stunted growth after you sprayed with oil- and detergent-based products. How do you know if you’re using oil- and detergent-based pesticides? Oil- and detergent-based pesticides look like milk or chalky water. Their oils are mixed with detergent and water but the ready-to-use spray smells like the oils it’s made with or the smell of the detergent. These concentrated plant oils include Neem, Rosemary, Pine, Peanut, Rose and others too many to mention. All oils need detergent to become soluble in water. If you spray oil based pesticides on a window and let it dry, you can write your name in dried spray with your fingernail.

Should I add a wetting agent to Nuke Em®?

Look for our wetting agent, SpreadCoat. SpreadCoat will be OMRI listed and made to work with Nuke Em®. It is now available.

Yes, we are finding that using a surfactant or wetting agent helps Nuke Em® to cover the leaf and in doing so contacts the insects, larvae, eggs etc. Plants leaves, some more than others, have a waxy cuticle which will tend to shed water and or the Nuke Em®. By adding the wetting agent, the leaf will get full coverage. The analogy for cars would be a freshly waxed car sheds water in beads. Add a wetting agent to the water and you have no more beads but a sheeting action over the fender.

Adding a wetting agent will allow you to use less Nuke Em® as more spray will stay on the leaf; less will be on the floor or ground.

Pro Growers Note: When ordering Nuke Em®, order Z7 at the same time. Over 80% of the time, leaf insect and powdery mildew attack indicates root zone problems! Start using Z7 now! Z7 is amazing and very inexpensive to use. It has saved countless growers from major malfunctions and made huge differences in yield and crop consistency. Z7 cleans bio-film from roots and grow systems and greatly decreases the chances of toxic reactions from incompatible plant foods and additives. Z7 will release mineral ions from carbon bonds so plants can feed properly. It also greatly reduces mineral build up from soils and plastic.

Currently not for sale in New Mexico, Mississippi and Indiana

I have a big infestation of broad mites, what are my options?

Because Nuke Em® is a contact killer it is very important that every mite and egg come into contact with Nuke Em®. Even in the best conditions with careful applications it is very hard get complete coverage on the first spray. Use Flying Skull’s wetting agent, SpreadCoat, to help Nuke Em® stick to the leaf and get good coverage.

Growers are reporting to us that they have had good luck with these MODIFIED applications. Remember to wash all other insecticides and fungicides off leaves before applying Nuke Em®. Modified applications are always best done by spraying a few plants and observing before spraying them all.

95% of growers that have insect problems have soil/growing mediums that are saturated with fertilizer causing the plant to become weak. The insects now have a home on a plant that can’t put up a decent self-defense. It is extremely important to wash this excess fertilizer from the growing media before the application of any brand of insecticide. Why? When the fertilizer in the growing media is higher than the osmotic threshold of the plant’s root system the plant becomes starved for water and the ratio of mineral ions become imbalanced. If the plant can’t get water from the roots, it will take water in through the leaves. If the water sprayed on the leaves has an insecticide in it, the insecticide will be brought into the plant for use in photosynthesis and vascular relocation. You never want to feed a plant insecticide. So, make sure the plant is fully hydrated before any application of insecticide or fungicide no matter the brand or type of insecticide.

Growing medium should be flushed in such a fashion that the water coming from the pot is no more than 50 PPM/TDS above the water supply’s PPM/TDS going into the pot. Only a PPM/TDS/EC meter can tell you this.

These initial flushing steps below will make sure that the plants will hydrate properly.

These steps will help the plant recover quickly from the initial insect attack and stress from insecticide applications.

  1. Flush the plant site with Z7 treated water. Use at least twice the amount of water than what the container holds in media; but more water is always better in this instance. (This includes plants grown in hydroponics.) Wait an hour and then pour a small amount of water across the top of the soil and catch the runoff for testing. You want to see this PPM number no more than 50 PPM above the PPM of your virgin water. The use of Flying Skull’s Z7 in the water at the time of the flush, and continued use afterward, would of great benefit to the plants.
  2. If you don’t have access to a hand-held EC/PPM meter, flush your plants very well with large amounts of water runoff three times and wait one hour before applying Nuke Em®.

After applying Nuke Em®, resume feeding your soil or soil-less grown plants. Always use the Z7 as it is a key factor in healthy plant growth.


This is the modified Nuke Em® application our customers said helped them with Broad Mite and Russet infestations. Let us know how it worked for you.

MODIFIED APPLICATION 1

DAY ONE: Apply one application at strong strength (lights turned to low level or if HID lights are more than 10 feet above the canopy), wait until it dries and then spray another application at strong strength, wait for it to dry and then spray another application at strong strength. (Three applications on the same day allowing the plants to completely dry between applications).

DAY THREE: Spray one strong strength application.

DAY SIX. Spray one strong strength application. Check for any signs of insects in the following days.

Use our wetting agent called SpreadCoat to help coat leaves and stems.


Think of Nuke Em® as brakes on your car. While driving, you don’t use your brakes all the time but your brakes are a very important part of your trip. Nuke Em® should be used as a maintenance spray every week. No matter how careful you are insects and powdery mildew will enter the growing area. Large scale growers use Nuke Em® as a maintenance tool that keeps them from having problems that reduce harvest quantity or quality. Nuke Em® is a tool. It is part of the cost of doing business.It is better to bear the extra cost of maintenance than not have a good supply of quality produce when customers ask for it. Remember, customers will find produce elsewhere if you can’t supply them what they want when they want it.

Outdoor growers have reported successful maintenance programs to control Powdery Mildew by using this rate of spray weekly: 2 ounces of Nuke Em® to every gallon of water with the SpreadCoat wetting agent added at 5 to 10 mls (1-2 tsp) per gallon of water. See more in the FAQ section of this website. This rate will make 64 gallons of ready to use spray for every gallon of Nuke Em® concentrate.


Nuke Em® can be used ON the day of harvest or even after harvest. See the video of Nuke Em® increasing the shelf life of strawberries (applied after harvest).

Other insecticides, fungicides and plant washes use brain and body nerve poisons, detergents, chemical surfactants, petroleum or plant oil in their formulas that leave smelly, bad tasting and sticky residue on produce. Ultimately these ingredients will reduce the sales, desired flavor and smell of the gardener’s produce.

Anyone using Flying Skull’s Nuke Em® will immediately see a complete control of plant parasites and Powdery Mildew. At the same time, they will notice that Nuke Em® is easy to use, safe to spray, doesn’t smell bad, and did not reduce the value of the produce!

Nuke Em® is a multi-purpose product. It replaces many expensive single target pesticides and fungicides. This makes it very affordable. It can be used to kill hiding insects and mold on walls, floors and other gardening surfaces.

Nuke Em®’s highly concentrated formula must be diluted before spraying onto plants or garden surfaces. Read and follow all label cautions and directions. Nuke Em® has been in the lab for over 10 years prior its release.

8 fl. oz. concentrate makes up to 2 gallons of ready to use spray.
32 fl. oz. concentrate makes up to 8 gallons of ready to use spray.
1 Gallon concentrate makes up to 32 gallons of ready to use spray.

Nuke Em® is not registered with the US Federal Environmental Protection Agency. Its formula qualifies for exemption under FIFRA section 25 (b) as a minimum risk pesticide.

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSRX10
Manufacturer: Flying Skull Plant Products
RX10

Rx10 plant wash has been formulated to enhance the looks of a plant by simply keeping it as clean as possible without waxy, soapy or detergent buildup. Rx10 dislodges any wax, dirt, grease, grime, soap, detergent, fertilizer or plant treatment that builds up on leaves and stems. Rx10’s deep down cleaning action makes your plant stand out from other plants because the plants true color shines through. A glowingly healthy plant is always considered first for ribbons at any plant show. Rx10 uses no oils, soaps, detergents or wax in its formula so you never have to worry about toxic build up on your show plant. Great for vegetables. You are what you eat!

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: SO901
Manufacturer: Flying Skull Plant Products
Bionix #1
MSRP: $20.95
Price: $12.50
FEATURED
Product ID: SO904
Manufacturer: Flying Skull Plant Products
Bionix #4

Bionix #4 is a superior Canadian Spagnum Peat Moss and perlite growing media for laboratory and professionally controlled growth environments that deliver the optimum air to water ratio. It has a slow release calcium package to buffer pH fluctuations and keep the uptake of soluble nutrients flowing into the plant’s root system at any climatic temperature. Formulated into it is RX 90, a Microbial package fortifies with both mycorrhizae and bacteria that is simply outstanding in its performance and ability to colonize roots and colony forming units (CFU’s). Put this on your list to try, you’ll be glad you did!

MSRP: $20.95
Price: $12.50
FEATURED
Product ID: SO905
Manufacturer: Flying Skull Plant Products
Bionix #5

Bionix #5 is a superior coconut and perlite based growing media for laboratory and professionally controlled growth environments. It delivers the optimum air to water ratio that is ultra important to professional growers. Like Bionix #4, it has a slow release calcium package to buffer pH fluctuations and keep the uptake of soluble nutrients flowing into the plant’s root system at any climatic temperature. Again, like Bionix #4 it has a mycorrhizae and bacteria package formulated into it. RX 90 is a Microbial blend that is simply outstanding in its performance and ability to colonize roots and colony forming units (CFU’s). Highly recommended for bullet proof performance!

MSRP: $20.95
Price: $12.50
FEATURED
Product ID: SO908
Manufacturer: Flying Skull Plant Products
Bionix #8

Bionix #8 is a superior triple washed coconut growing media for laboratory and professionally controlled growth environments. It may be blended with other growing media or used straight from the bag. Like Bionix #4 and #5, it has a slow release calcium package to buffer pH fluctuations and keep the uptake of soluble nutrients flowing into the plant’s root system at any climatic temperature. A mycorrhizae and bacteria package has been formulated into it called RX 90. It is a microbial blend that is simply outstanding in its performance and ability to colonize roots and colony forming units (CFU’s). Highly recommended and for use with all coco plant foods!

MSRP: $26.95
Price: $17.00
FEATURED
Product ID: FSpHUp
Manufacturer: Flying Skull Plant Products
Elite pH UP

Elite pH UP is formulated to work with the chemistry involved in the whole Flying Skull plant product line. Using it as directed with keep mineral ions from forming insoluble compounds. These two products are used to raise or lower the nutrient feed to match the optimum pH range you’re plants like to grow in.

*** Not UPS Shippable *** Available In-Store Only ***

:
MSRP: Select a Size
Price: Select a Size
FEATURED
Product ID: FSpHDown
Manufacturer: Flying Skull Plant Products
Elite pH Down

Elite pH DOWN is formulated to work with the chemistry involved in the whole Flying Skull plant product line. Using it as directed with keep mineral ions from forming insoluble compounds. These two products are used to raise or lower the nutrient feed to match the optimum pH range you’re plants like to grow in.

*** Not UPS Shippable *** Available In-Store Only ***

:
MSRP: Select a Size
Price: Select a Size
Product ID: MI002
Manufacturer: Flying Skull Plant Products
Flying Skull Tshirt

Our 100% cotton T-shirts are available in limited quantities.

:
MSRP: $19.95
Price: $10.00
Product ID: MI004
Manufacturer: Flying Skull Plant Products
Flying Skull Tank Top

Our 100% cotton Tank Tops are available in limited quantities.

:
MSRP: $15.95
Price: $8.00