Login Status  Login Status

Not logged in

» Login
Now accepting PayPal

You must be logged in to view prices.

Click Here to Sign In
Home » Lighting » Light Movers & Hangers
 
FEATURED
Product ID: CW600
Manufacturer: Control Wizard Products
The Levitator

Holds up to 12 lbs per line. Easy to use reflector lift system.

MSRP: $19.95
Price: $5.00
Product ID: MI991
Manufacturer: Sunlight Supply
Sun Grip Rope Ratchet

SunGrip Rope Ratchet Light Hangers allow you to secure items quickly and easily. Great for hoisting and securing, reflectors,light fixtures, carbon filters and ventilation equipment. 150 lb. capacity.

MSRP: $14.95
Price: $11.96
Product ID: MI992
Manufacturer: Sunlight Supply
Sun Grip Heavy Duty Hanger

SunGrip™ Heavy Duty Light & Equipment Hangers allow you to secure items quickly and easily. SunGrip’s patented system pulls tight, locks in place, will never break or slip, and will not rust. Made with special composite material. Heat and cold resistant. 8’ braided polypropylene rope. Carabiner clips provide a secure hold. Great for hoisting and securing:

  • Reflectors and light fixtures.
  • Carbon filters or ventilation equipment.
  • Maximum weight capacity is 150 lbs. each (300 lbs. a pair).
  • Excellent for use with heavier equipment like carbon filters hanging multiple light fixtures and more!
MSRP: $14.95
Price: $11.96
Product ID: MI990
Manufacturer: Sunlight Supply
SunLift light Hangers

Limited to Quantity on Hand

SunLift is a reflector suspension system which allows you to adjust the height of a hood in one simple movement. The tension mechanism will keep the hood in place once it is set at the desired height. The support strings pull out and retract like a yo-yo. Finally a simple way to raise a hood as plants grow! Holds up to 22 lbs. Price includes a pair which accomodates one hood. Hardware is also included.

MSRP: $13.95
Price: $11.16
Product ID: LS1471
Light Rail 3.5 Motor Hardware Kit

This is the same hardware that came with the original Light Rail robot motor.

MSRP: $4.95
Price: $3.96
Product ID: LS149
Light Rail 3.5 Drive Wheel

Drive O-ring, shaft and spring make up this kit.

MSRP: $7.50
Price: $6.00
Product ID: LS154
Light Rail 3.5 Extension Track

3 feet in length. Use instead of 6' track or extend 6' track to 9' total run.

Adds and extra 3 feet of track to your run. The track comes with pins that slide into your existing track for stability.

MSRP: $16.95
Price: $13.56
Product ID: LS1531
Light Rail 3.5 Auxillary Trolley

Use this to add another reflector and lamp to a Light Rail 3.5 light mover. Connect the robot to this with threaded rod and nuts.

MSRP: $19.95
Price: $15.96
Product ID: LS147
Light Rail 3.5 Wheel Kit

Four wheels and screws make up this replacement kit.

MSRP: $6.95
Price: $5.56
Product ID: LS153
Light Rail 3.5 Add-A-Lamp

Add-A-Lamp allows you to run two reflectors back and forth with only one motor instead of just one.

Comes complete with a threaded pole that attaches the main robot motor with the trolley, a section of track (both approximately 6 feet in length) and a trolley with screw pack.

MSRP: $57.95
Price: $46.36
Product ID: LS152
Light Rail 3.5 IntelliDrive

Light Rail light mover 3.5 IntelliDrive drive motor assembly. Built in 0-60 second adjustable time of delay at each end of the track. 10 rpm. You must purchase the track (LS151) for it to ride on.

MSRP: $199.95
Price: $159.96
Product ID: LS156
Light Rail Robo Stick

Reduces reflector swing as the mover stops.

Slide the eye hooks into place and screw in the robot attachment bolt into the robot. Now guide bolt into the slot on the bar and tighten. Now hang your reflector from the eye hooks.

MSRP: $26.95
Price: $21.56
Product ID: LS151
Light Rail 3.5 Track

6 Feet in length. For use with the Light Rail Intelli Drive LS152 drive motor assembly.

MSRP: $27.95
Price: $22.36
Product ID: LS157
Light Rail 5 System

The Light Rail 5 is great for multiple reflectors. If properly balanced, the system will hold 90+ lbs. Extremely heavy-duty and functional. Comes complete with high torque 4 RPM 110V motor, adjustable crossbar and 8' rail.

Designed with the commercial grower and serious home hobbyist in mind, the Light Rail 5 is clearly ready for work.

From the all new "triple-duty" extruded aluminum track, super "wide-n-stable" carriage with steel-on-steel carrier bearings, to the high torque instrument grade drive motor with ball bearing output shaft and "sure grip" dual drive design. The new Light Rail 5 is more than capable of moving 2 or 3 lamps, side-by-side or for and aft.

The Light Rail 5 is quite simply the most capable and versatile light mover to date from the manufacturers of the original Light Rail Intellidrive 3.5.

Features:

  • "Triple-Duty" extruded aluminum track
  • Super "Wide-n-Stable" carriage
  • "Steel-on-steel" carrier bearings
  • Adjustable Cross Bar for multiple lights
  • "Sure-Grip" dual drive design
  • Solid state advanced controls; fully integrated PCB circuitry with 0-60 second adjustable time delay
  • High torque instrument grade drive motor with ball bearing output shaft
  • LIMITED LIFETIME WARRANTY!
MSRP: $499.95
Price: $399.96
Product ID: LS158
4ft Rail for Light Rail 5

Use this 4 foot auxiliary rail to extend your Light Rail 5 lighting system.

Note: This item includes only the 4Ft Auxiliary Rail.

MSRP: $66.95
Price: $53.56